5.0(
- The receiver has a mounting bracket that will fit into a traditional flash stand, with a 1/4 20 threaded hole for mounting on a light stand or tripod.
- An adjusting knob allows the receiver to tilt on the bracket, with detents at straight up and 45 degree forward and backward positions (It can be tightened in any position +/- 90 degrees from vertical).
- On the top of the receiver is a hotshoe for mounting a flash unit. On the front of the unit is a small on/off switch and a small LED light that illuminates briefly when fired. The back of the receiver snaps off to reveal the battery compartment and two dip switches for channel selection.
- It uses two AAA batteries, the type typically used in film cameras. The battery compartment of the receiver is not clearly marked for polarity, but there is a faint outline showing the positive tip of the battery on the circuit board.
- Without the bracket and adjusting knob.
- The transmitter can be either mounted on the camera's hotshoe or connected to the camera's PC socket with the cord supplied.
- Using the PC socket connection (if your camera has one) allows simultaneous use of a hotshoe-mounted flash unit and off-camera flashes with this radio trigger set.
- There is a test button on the top of the transmitter for test firing. The dip switches for channel selection are located on the bottom.
- There is no power switch. The transmitter uses a small 12V alkaline battery (the type typically used in garage door opener remotes).
Specification:
- Weight: 150 g
- Size: 14.5*8.8*4.5 cm
Package Content
- 1 X Receiver
- 1 X Trigger
- Main Feature:
Shipping:
There are two key factors which will affect the time you receive your items.
1. Item processing time
After the receiving of your order, we need some time to test the product in order to ensure its quality. There are different kinds of processing time for different items. Average processing time is 3 working days; however, it varies from the item's stock status. As for the small quantity, the processing time is 1-3 days while as for the large quantity, it will be about 2-5 days.
2. Shipping methods
Payment:
Everbuying.com accept PayPal, Wire transfer , Western Union as the payment methods.
1. PayPal.
The most convenient payment method in the world.
2. Wire transfer
For order which is more than $1500, please contact us at Support@everbuying.com
Note: please do email us your order number, the amount you pay, the exact date you do the wire transfer after you pay for it
3. Western union
Please contact us at: Support@everbuying.com for details.
Note: Please email us the following information after you pay the Western Union
1) The 10 digit control number.
2) Sender's name.
3) The exact amount you send.
4) Sender's address.
5) Your shipping address.
